01384 823396 info@ptmi.co.uk

REPAIR AND MAINTENANCE

REPAIR AND MAINTENANCE

PTMI are also unique as we can provide bespoke structural installations and repair works to maintain your assets during our inspection work.

Larger issues may require a return visit for correction, however in many cases we can rectify immediate hazards to ensure that the structure is safe to use as seen in some of our examples below.

PTMI are also able to help with your access requirements such as the installation of fixed ladders where required.
Contact us now to discuss your requirements and how PTMI can help.

DAMAGED MISSING GAPS IN HANDRAILS

REPAIRED, INSTALLED OR REPLACED

MISSING, INADEQUATE OR FAULTY SAFETY GATES

SPRING LOADED, SELF CLOSING SAFETY GATES FITTED

GENERAL REPAIRS AND MAINTENANCE

FAQ's

0
Will Brexit affect the health and safety requirements of my business?

Your duties to protect the health and safety of people affected by your work will not change with Brexit. Legal requirements will remain the same as they are now. Health and safety standards will be maintained.

What is work at height?

Work at height means work in any place where, if precautions were not taken, a person could fall a distance liable to cause personal injury. You are working at height if you:
work above ground/floor level
could fall from an edge, through an opening or fragile surface or
could fall from ground level into an opening in a floor or a hole in the ground

What do I need to do to comply with the Work at Height Regulations 2005?

The Regulations apply to all work at height, where there is risk of a fall liable to cause personal injury. They place duties on employers, and those who control any work at height activity (such as facilities managers or building owners who may contract others to work at height).

As part of the Regulations, you must ensure:

All work at height is properly planned and organised

Those involved in work at height are competent

The risks from work at height are assessed, and appropriate work equipment is selected and used

The risks of working on or near fragile surfaces are properly managed

The equipment used for work at height is properly inspected and maintained.

 

For help with all of the above according to your business needs, contact us now.

How often must work at height inspections and maintenance be carried out?

Suitable intervals between inspections are determined on the basis of risk assessment. 

The nature, frequency and extent of any inspection is determined by considering factors such as the type of equipment, how and where it is used, its likelihood to deteriorate etc. 

If equipment is used in onerous outdoor conditions, it may be appropriate to inspect it more regularly than something which is used indoors.

How do I know what health and safety risks there are and how do I protect against them?

As part of managing the health and safety of your business, you must control the risks in your workplace. 

To do this you must think about what might cause harm to people and decide whether reasonable steps are being taken to prevent that harm. This is known as risk assessment and it is something you are required by law to carry out. 

A risk assessment is not about creating huge amounts of paperwork, but rather about identifying sensible measures to control the risks in your workplace. You are probably already taking steps to protect your employees, but your risk assessment will help to recognise whether you have covered all you need to.

For some risks, other regulations require particular control measures. The assessment can help you identify where you need to look at certain risks and these particular control measures in more detail. 

Contact us for help with conducting a full risk assessment, implementation of control measures and the documentation you require to comply with law now.

What is a health and safety policy and why do I need one?

The law says that every business must have a policy for managing health and safety.

A health and safety policy sets out your general approach to health and safety. It explains how you, as an employer, will manage health and safety in your business. It will clearly state who does what, when and how, i.e. your procedures.

If you have five or more employees, your policy must be physically documented. If you have fewer than five employees you do not have to write anything down, but it is useful to do so.

You must share the policy, and any changes to it, with your employees.

For help with creating and providing your organisation with your health and safety policies and procedures contact us now.

PTMI Ltd

108 The Cottages Warrens Hall Rd
Dudley
DY2 8DH

01384 823396

info@ptmi.co.uk

GDPR Cookie Policy | Privacy Policy

© 2019 PTMI Ltd. All Rights Reserved. - Website By Storme Jukes

Call Now Button